Williams Form Engineering Corp. Williams Form Engineering Corp.
Williams Form Engineering Corp.
DownloadsDownloadsWhat's NewContact UsAbout UsWilliams Form Engineering Corp.
Ground Anchor Systems
Concrete Anchor Systems
Post Tensioning Systems
Threaded Bars with Fasteners
Tie Rods & Tie Backs
Micro Piles
Concrete Forming Hardware Systems
Williams products are made in the USA

Threaded Bars with Fasteners

Threaded
Bar Types
Case
Histories
Corrosion
Protection

Williams offers various bar steel grades, thread configurations and diameters in lengths up to 50. ft. for whatever your need may be. Williams thread forms are RH or LH and include but are not limited to coil, UNC, Acme, and Modified Acme. Most thread forms are rolled for concentricity and strength. The bars can be continuously threaded or threads may be put on ends. Infeed maximum varies per diameters. All bar types and diameters have matching fasteners including hex nuts and couplings designed to develop the full tensile strength of the bar. We can thread customers material in most cases: carbon steel, alloy steels, stainless steels, aluminum, brass, tubing, ect. Also we can furnish standard internally threaded components - or custom per your drawing.

Bar Type Strengths
up to:
Diameter
Range
Typical
Uses
150 KSI All-Thread-Bar 1027 Kips 1" to 3" Ground Anchors,
Post-Tensioning, Tie Thrus
Grade 75 All-Thread Rebar 960 Kips #6 to #28 Ground Anchors,
Soil Nails, Tie Thrus,
Concrete Forming Systems
Grade 90 All-Thread Rebar 187 Kips #11 Wind Energy Foundations
Tieback Anchors
Grade 60 All-Thread Rebar 71 Kips #4 to #8 Ground Anchors, Tie Thrus,
Concrete Forming Systems
Grade 60 Reinforcing Bar 360 Kips #4 to #18 Resin Anchoring,
Concrete Forming Systems
Grade B-7 Threaded Bar 330 Kips 1/2" to 2" Ground & Concrete Anchors
subject to high impact loads
High Tensile Coil Threaded Bar 140 Kips 3/8" to 1-1/2" Ground & Concrete Anchors,
Concrete Forming Systems
High Tensile UNC Threaded Bar 310 Kips 3/8" to 2" Ground & Concrete Anchors,
Concrete Forming Systems
Hollow-Core Threaded Bar 300 Kips 1" to 2" Grouted Ground Anchors
Geo Drill Hollow Injection Bar 407 Kips 1-1/4" to 3" Grouted Ground Anchors
Tieback Anchors
Micro Piles
150 KSI All-Thread-Bar Grade 75 All-Thread Rebar
Williams Form Engineering Corp.
Threaded
Bar Types
Case
Histories
Corrosion
Protection
Contact Us Home
Williams Form Engineering Corp. All rights reserved. reserved.